Your Reliability Engineering Professional Development Site
Chris and Fred discuss the difference between ‘making’ and ‘checking’ reliability. And there is a difference. This podcast follows on from Chris’s article about a US Department of Defense (DoD) quick reference guide on a ‘Reliability and Maintainability Engineering Body of Knowledge.’ The problem with this document was it was all about ‘checking’ reliability – and not enough ‘making’ reliability.
ᐅ Play Episode
There comes a time in everyone’s reliability ‘journey’ when it is either too hard or too expensive to keep perfecting your product, system, or service. Steel can only be ‘so’ pure. Clearances can only be ‘so’ accurate. Surfaces can only be ‘so’ smooth. And software can only be ‘so’ perfect. In fact, it might turn out to be better and cheaper to have two ‘average’ components, with one acting as a backup to the other. The ‘premium’ component might be too expensive or otherwise not as reliable as the backup system. Welcome to fault tolerance! This is where we design products, systems, or services to be able to handle faults, imperfections, deviations, errors, and lots of other things. [Read more…]
In this week’s special episode of The Maintenance Community Pod, we’ll be doing another Community Question Round-Up, where we review questions submitted by members in our Maintenance Community Slack group and hear insight from one of our Maintenance Experts in Residence, the Reliability Sherpa himself — Ramesh Gulati. Listen today!
[Read more…]
The Leadership Connection Host, Doug Plucknette, interviews reliability leader Jason Hartman in Episode 10 of this series. Jason has held many roles in leadership and currently is a top leader, leading teams in a diverse number of plant operations roles including production management, project management, facility leadership, maintenance management, reliability leadership, and manufacturing engineering.
I’m a fan of cross-functional teams. My main reason is that the different perspectives that each person brings from their respective areas of the business helps create a more complete vision of product and performance risk. Part of quality (and design!) means assessing and managing risk, and I’ve seen time and again the power of bringing people together: better understanding, greater alignment, and improved designs (to name just a few).
Part of being an effective team member is knowing what the other teammates are responsible for doing. It’s important because we need to know who to ask or interface with at certain points in our design process.
This podcast is about Who’s Who of your Quality Team. A Quality Engineer or Reliability Engineer may be part of a cross-functional team for a project. A Supplier Quality Professional, Calibration Technician, Quality Technician, and Quality Inspector may not be, but they are performing functions and duties that have an effect on the success of a product design. The podcast gets into who does what in these Quality roles, and why designers should involve them during the design process.
What are the tools in the reliability tool box? Are they being used properly? How could they be utilized better?
In this episode Steve & Blair welcome Chris Defalco to the show to discuss some of the tools in the reliability tool box. We learn about some tools that are out there and how they can be used better.
Episode Shout Outs:
Chris Defalco – https://www.linkedin.com/in/cdefalco/
Itus Digital – https://www.itusdigital.com/
If your company sells products or services to engaged maintenance & reliability professionals, tell your marketing manager about Maintenance Disrupted. If you’d like to discuss advertising, please email us at maintenancedisrupted@gmail.com
Check out our website at www.maintenancedisrupted.com and sign up for the weekly disruption newsletter with bonus content. If you like the show, please tell your colleagues about it and follow maintenance disrupted on LinkedIn and YouTube.
Follow Maintenance Disrupted on LinkedIn
https://www.linkedin.com/company/maintenancedisrupted
Music: The Descent by Kevin MacLeod
Link: https://incompetech.filmmusic.io/song/4490-the-descent
License: http://creativecommons.org/licenses/by/4.0/
Welcome Fred back to the podcast. Clients are starting to realize that they have to design their systems properly while paying attention to certain tradeoffs. However, tell us where they should start; whether to design for reliability or maintainability.
Before starting, the team has to look at their business goals and decide whether the acquisition of any system or a piece of equipment assists to that end. It has to be a business decision.
Pay attention to:
In this episode we covered:
Kirk and Fred discussing how we can insure we receive outsourced parts meet our requirements when we may not know what variances in specifications will affect your particular system.
ᐅ Play Episode
In this episode of The Maintenance Community Podcast, we have Allyson Hawley, Asset Health Lead of Mobile Assets at Teck Resources Limited, on the show! Allyson is a wealth of knowledge when it comes to Asset Health and Monitoring, and Ryan takes the opportunity to learn more about this topic from her. Listen today!
[Read more…]
Kirk and Fred discussing a recent failure of an electric range/oven and the troubleshooting, FA and repair. See the show notes to see photos and details of the failure analysis.
ᐅ Play Episode
The Leadership Connection Host, Doug Plucknette, interviews reliability leader Bill Barto in Episode 9 of this series. Bill has spent over 20 years in various Engineering, Reliability and Maintenance roles. His work interests include Preventive Maintenance Optimization, Failure Modes, Effects and Criticality Analysis (FMECA), Reliability-Centered Maintenance and Failure Reporting, Analysis, and Corrective Action Systems (FRACAS).
When trying to fit a probability distribution to quantitative results, sometimes the normal probability doesn’t fit. Minitab has a wealth of distributions to pick from. Do you just pick whichever one Minitab tells you fits the best? Maybe not. Just because the distribution fits your data doesn’t mean it’s a good one to use. We review my top 3 distributions for product testing and some other ones that come up but may not be appropriate to use.
We’ll also share what you need to think about when picking a distribution:
I often describe reliability work as we do everything quality does, and we do it over time. Quality folks may disagree. What is not in dispute is that in reliability engineering, we use a lot of different ‘quality’ tools. That is because many quality tools lend themselves to data analysis and problem-solving, [Read more…]
Industry 4.0 is a current paradigm. Plants are being digitized and maintenance is evolving towards 4.0. The digitization of critical assets has led to a strong interest in detailed condition monitoring during their lifetime, using different online condition monitoring techniques.
Online lubricant monitoring can be widely deployed to provide early fault diagnosis to improve reliability and boost cost savings. The use of this advanced data helps operators make better O&M decisions and optimize asset conditions and lifetime management. Online lubricant monitoring is applied to assess the wear signature and measure the oil degradation and contamination processes for different equipment, even in the most extreme scenarios. [Read more…]
Welcome Simon back to the podcast. Simon is the founder of Samotics and has been involved in technology throughout his Career. Today we will talk about capabilities trap. Although briefly, tell us more about you:
Involved with technology, our guest focuses on: machine learning, and the conversion of data into information.
In this episode we covered:
