A Conversation with IPC’s Matt Kelly on IPC Technology Focus & Investment

Episode 50 – A Conversation with IPC’s Matt Kelly on IPC Technology Focus & Investment

IPC’s New Chief Technologist Matt Kelly talks about Factory and Supply Chain of the Future Modernization

In this new leadership role, Kelly will help IPC’s members to engage in latest technology trends and supply chain transformation that continues to evolve across the electronics industry. He will work to define the scope of what future products and services the association should develop inthe areas of standards, education and advocacy. Kelly’s primary areas of focus will be leading the following initiatives: “factory of the future” standards and technical research; industry intelligence funding; and creation and launch of an Industry CTO Council.

Kelly comes to IPC following a 14-year career at IBM Corporation, holding several senior technology and engineering leadership positions within IBM Systems Division. His technical contributions include 25 patents, 80 publications, and numerous industry awards from NAM, ASM, SMTA, IPC, and IBM.

Very familiar with IPC’s standards development process, Kelly has served on seven technical committees and currently serves as vice chair of the 5-21H Bottom Termination Components Task Group and co-chair of the 2-17 Connected Factory Initiative Subcommittee.

“Matt is widely recognized in the global electronics industry as a premier thought leader and an innovator, and his work will play a pivotal role in helping us know our members and the industry – with greater depth and breadth,” said Sanjay Huprikar, vice president, Solutions. “We are thrilled to welcome Matt to the IPC team, and we look forward to the new contributions he will make to the electronics industry.”

Based in Toronto, Kelly can be reached at MattKelly@ipc.org.

[Read more…]

A Conversation with SMTA’s Tanya Martin and Greg Vance about SMTAI 2020

Episode 49 – A Conversation with SMTA’s Global Executive Director Tanya Martin and Greg Vance, Member of SMTA Global Board of Directors about SMTAI 2020’s new virtual format. 

Numerous exhibitors are taking part in this new format. More than 100 technical presentations and papers will be available on-demand. Additionally, nine 3.5 hour professional development courses will be presented live!

Register to attend the virtual exhibition and technical conference here: 
https://smta.org/mpage/smtai

[Read more…]

A Conversation with a China Supply Chain Expert about Importing from and Exporting to China

Episode 48: A Conversation with David Alexander, a China supply chain expert about Importing from and Exporting to China.

We are all familiar with the pros and cons of importing goods from China. China supply chain expert David Alexander discusses pros and cons of doing business in China. David also discusses the lesser known opportunities of exporting US goods to China and China’s appetite for western brands.

David is the Founder and President of Baysource Global, company which provides management of offshore factories, US sales and distribution of Chinese products as well as distribution of US products in to China.

Information on Baysource Global is available here:
https://baysourceglobal.com

David Alexander may be contacted here:
david.alexander@baysource.net

[Read more…]

A Conversation with Environmental Sustainability Expert Matthew Chalkley

Episode 47: A Conversation with Environmental Sustainability Expert Matthew Chalkley 

Matthew Chalkley has over 26 years of supply chain experience in the Information and Communication Technology (ICT) sector. Matthew has held a number of senior operational management positions within, engineering, manufacturing, materials management, procurement, and customer order fulfillment.

Matthew was the Global Program Manager for IBM’s Supply Chain Social & Environmental Management System and the Global Tactical Lead for IBM’s Center of Excellence for Product Environmental Compliance. Matthew currently chairs the Environmental Sustainable Electronics (ESE) Technical Work Group for the International Electronics Manufacturing Initiative, known as iNEMI.

Matthew has a Post Graduate Diploma focused in Environmental Management from the University of Ulster.

Matthew may be reached here:
chalklem19@gmail.com

[Read more…]

“The Experts” – A Special Episode Featuring a Conversation with Four Industry Experts

Mike Konrad joins Dr. Jennie Hwang, Phil Zarrow, Bob Willis, and Ray Prasad to discuss several industry topics including the pandemic, common technical issues, training and support, and other interesting topics. 

A video version of this podcast is also available here:
https://vimeo.com/433866207/d0f9ac8f65

Dr. Jennie Hwang 
jennie.hwang@h-techgroup.com
www.jenniehwang.com 

Phil Zarrow
phil_zarrow@itmconsulting.com
www.itmconsulting.com

Bob Willis
bob@bobwillis.co.uk
www.bobwillis.co.uk

Ray Prasad
rayprasade310@gmail.com
www.rayprasad.com

[Read more…]

A Conversation with Dr. Chris Jackson About Reliability

Episode 45: A Conversation with Dr. Chris Jackson About Reliability
Dr. Chris Jackson discusses reliability and his five-part article series entitled “3 Ways to do Reliability Allocation.”

Dr. Chris Jackson is the founder of Acuitas, a company dedicated to reliability. 

Chris founded Acuitas in 2010. He was awarded his mechanical engineering degree from the University of New South Wales, and has since receive a Masters in PhD in Reliability Engineering from the University of Maryland. He is an American Society of Quality Certified Reliability Engineer (CRE), and a Chartered Professional Engineer (CPEng) from Engineers Australia.
​
He has been the Senior Reliability Engineer for the Australian Defence Force, and has been the director and founder of multiple research centers at the University of California Los Angeles. He has authored or co-authored multiple textbooks on reliability engineering and implemented several RAM programs across multiple industries.

During the interview, Chris discusses his five-part article entitled “3 Ways to do Reliability Allocation.” This article may be viewed here:
https://fred-schenkelberg-project.prev01.rmkr.net/?s=3+Ways+to+do+Reliability+Allocation

Additional technical works by Dr. Jackson may be viewed here:
https://fred-schenkelberg-project.prev01.rmkr.net/page/2/?s=jackson

Dr. Jackson’s book “Reliability Engineering and Management” may be purchased here:
https://www.amazon.com/Reliability-Engineering-Management-Christopher-Jackson-ebook/dp/B071LGDYQG

Dr. Jackson may be reached here:
chris.jackson@acuitas.com

[Read more…]

A Conversation with Dr. Jennie Hwang About Reliability

Episode 44: A Conversation with Dr. Jennie Hwang About Reliability

Dr. Hwang’s wide-ranging career encompasses international business operations, sustained leadership in worldwide manufacturing and technology services, innovative research, intellectual property management, global leadership positions, as well as corporate and university governance.

Dr. Hwang held senior executive positions with Lockheed Martin., SCM Corp., Sherwin Williams., and was the CEO of International Electronic Materials Corp. as well as co-founded entrepreneurial companies. Currently, her company provides business, technology and manufacturing solutions to the global industry. She has served as an advisor to many Fortune 500 multinational companies, as well as the U.S. government programs.

Her formal education includes Harvard Business School’s Executive Program, Columbia University Business School Corporate Governance program, and four academic degrees (PH.D., MS, MA, B.S.) in Engineering & Sciences from Case Western Reserve University, Columbia University, Kent State-Liquid Crystal Institute and Cheng-Kung University, respectively. She was the first female to earn a doctorate from Case Western Reserve University’s Engineering School – Materials Science & Engineering and has served on the University’s Board of Trustees since 1996.

Dr. Jenny Hwang may be reached here:
http://www.jenniehwang.com
jennie.hwang@h-techgroup.com
Tel: 216-577-3284

[Read more…]

A Conversation with Cal State University’s Dr. Mike Stull

Episode 43: A Conversation with Cal State University’s Dr. Mike Stull about Entrepreneurship and Today’s Challenging Times

Dr. Mike Stull is the Director of the Inland Empire Center for Entrepreneurship (IECE) at California State University, San Bernardino (CSUSB). He also serves as Chair for the Department of Management in the Jack H. Brown College of Business and Public Administration and academic director for entrepreneurship. 

With more than 30 years as an entrepreneur in for-profit, non-profit, and public sector environments, Mike describes himself as the “living example” that entrepreneurship is a process that can be applied in any setting and he truly “thinks like an owner.” As someone who likes to challenge his students in and out of the classroom, Mike is viewed as an innovative and demanding teacher that brings the reality of entrepreneurship into the classroom. As one of his students noted “the class projects that Mike assigns, such as having to start and run a business, touch on every aspect of what it takes to be an entrepreneur. It truly is learning applied to the reality of entrepreneurship.” Due to this “hands-on” and entrepreneurial approach, Mike has been recognized with several teaching awards in the Jack H. Brown College, was considered for the CSU system’s highest honor for faculty, the Wang Family Excellence Award, and was the recipient of the Entrepreneur of the Year (EOY) award from Ernst & Young.

Directing the university’s entrepreneurship program and Inland Empire Center for Entrepreneurship (IECE), Mike is responsible for program & curriculum management and development, teaching entrepreneurship courses, and overseeing numerous entrepreneurial initiatives. He has raised over $28 million in grants, contracts and sponsorship and achieved national acclaim, including ranking as the #4 graduate entrepreneurship program in the U.S. from The Princeton Review & Entrepreneur Magazine, receiving the prestigious National Excellence in Entrepreneurship Education Award in 2010 from the United States Association for Small Business and Entrepreneurship (USASBE) and selected as one of the top 35 entrepreneurship programs globally in 2017 by AACSB International.

Education

BA/MBA – California State University San Bernardino
EDM – Case Western Reserve University

Courses/Teaching

Mike developed nine (9) of the current entrepreneurship courses taught at the undergrad and grad programs in Entrepreneurship. He currently teaches:

ENTR 543 New Venture Opportunity Analysis
ENTR 621 Entrepreneurship and New Ventures

Mike may be reached at mstull@csusb.edu

[Read more…]

A Conversation with X-Ray Expert Keith Bryant

Episode 42: A Conversation with X-Ray Expert Keith Bryant

Keith discusses the advantages of x-ray technology, its practical uses, and common mistakes made when using x-ray technology. 

Keith’s Bio:
A fully qualified engineer, Keith has over thirty years’ experience in Electronics Manufacturing. He is well known and respected for presenting technical papers at many high-profile events around the world and for his many published articles and interviews.  

He started his career in this industry with bare printed circuit boards in the early days of high-count multi-layer technology, moving through to running contract manufacturing operation. He had ten years’ experience with advanced materials and soldering systems before working with high technology x-ray and AOI Systems, again for 10 years.

Then for almost 3 years Keith worked as a technology and business consultant, assisting many of the major industry names.

From 2017 to 2019 he was Global Sales Director of the leading x-ray manufacturer. Last year reverting to a technology and business consultancy role allowing him to pursue other interesting projects, including i4.0 and working with an advanced x-ray tube manufacturer.

He was Chairman of the SMART Group for 11 years and is now Chairman of SMTA Europe, in 2018 he was presented with the SMTA International Leadership award.

Keith’s Contact Information:
Email: Keith@KeithBryant.net

[Read more…]

A Conversation with Better Board Buying’s Greg Papandrew

Episode 41: A Conversation with Better Board Buying’s Greg Papandrew About Ways to Buy Boards Better. Should you purchase boards overseas or domestically? What questions should you ask your board vendor? Greg answers these and other board-buying questions.

Our guest is Greg Papandrew, co-founder of Better Board Buying. Greg is the author of PCB Basics for Buyers. Greg can be reached here:
Greg Papandrew
greg@boardbuying.com
https://boardbuying.com

[Read more…]

A Return Conversation with SMT Guru Bob Willis

Episode 40: A Return Conversation with SMT Guru Bob Willis. Thirty nine episodes after Bob’s first appearance on Reliability Matters he returns to discuss life as a consultant in the electronics assembly industry.

Bob can be reached at:

Bob Willis
2 Fourth Avenue,
Chelmsford, Essex,
CM1 4HA England
Tel: +44 (0)1245 351502
https://www.bobwillis.co.uk
bob@bobwillis.co.uk

[Read more…]

A Conversation with Advanced Assembly’s Mark Hughes and Greg Ziraldo About Producing Reliable Assemblies Within a CM Environment

Episode 39: A Conversation with Advanced Assembly’s Mark Hughes and Greg Ziraldo About Producing Reliable Assemblies Within a CM Environment.

During this interview, we discuss two papers:
Introduction to Reliability in Electronics: Tools and Metrics for Anticipating Device Failure
by Mark Hughes
https://tinyurl.com/rxmntru

Cosmic Mishaps: How Cosmic Rays Can Disrupt Your Design
Part 1: https://tinyurl.com/smccuf7
Part 2: https://tinyurl.com/ro4e5nt
Part 3: … See More

[Read more…]

A Special COVID-19 Episode – Conversation with Circuits Assembly Magazine’s Editor in Chief Mike Buetow

Episode 38: A Special COVID-19 Episode – A Conversation with Circuits Assembly Magazine’s Editor in Chief Mike Buetow

Mike and I discuss the state of the industry amid the COVID-19 crisis. Mike provides a SWOT (strengths, weaknesses, opportunities, threats) analysis of our industry and provides his view from Productronica and APEX.

[Read more…]

A Conversation with IPC’s President and CEO Dr. John Mitchell

Episode 37: A Conversation with IPC’s President and CEO Dr. John Mitchell

Dr. John Mitchell talks about the state of the industry, COVID-19 (Corona Virus), and the future of the electronic assembly industry.

[Read more…]

A Conversation with “Board Talk” hosts Phil Zarrow and Jim Hall

Episode 36: A Conversation with “Board Talk” hosts Phil Zarrow and Jim Hall.

Welcome to a special episode of Reliability Matters, recorded live at IPC APEX Expo, thanks to my friends at Scoop TV. You may hear some background noise as I’m not in my usual studio rather, I’m on a busy and rather loud trade show floor.  

Today, we are bringing back two previous guests, Phil Zarrow and Jim Hall of ITM Consulting. Phil and Jim host Board Talk, a popular broadcast where they field assembly-related questions and provide answers in a style only they can deliver.

We’ll discuss how they go about “fixing” their customer’s problems and their new upcoming book, Trouble Shooting Electronic Assemblies, Conversations from the Board–Talk Crypt.

[Read more…]