Reliability and Tolerance Analysis
A tolerance specification is how we communicate the allowance for part variation.
Variation happens, and when it is within what we expect, great. Otherwise, quality and reliability issues ensue. Let’s explore how to set tolerances to improve reliability properly.
Let’s understand the process data, stability, and design constraints in an attempt to find a balance to create meaningful tolerances.
[NOTE: Check out the ebook Statistical Tolerance Analysis]
Worst case isn’t always feasible, yet it is very common.
Consider using the root mean squared or the Monte Carlo approach. The worst-case approach relies on little data, just a range, whereas RMS assumes a normal distribution of the variation.
The Monte Carlo approach may require the most information, and it provides the best results.
A few quick overviews and examples, plus plenty of time to discuss the role of the reliability professional in the tolerance seeing process.
Join the conversation during the webinar.
This Accendo Reliability webinar originally broadcast live on 16 June 2015.
- Social:
- Link:
- Embed:
To view the recorded webinar and slides, visit the webinar page.
Related Content
Confidence and Tolerance Intervals episode
Design Tolerances Based on Economics (Using the Taguchi Loss Function) episode
Estimating the Normal Distribution Parameters and Tolerance Limits article
Inputs to Consider When Setting Tolerances article
Reliability and Tolerance Analysis
Tolerance specification communicates the allowance for part variation. Variation happens, and when it is within what we expect, great.
Creating Meaningful Reliability Predictions
Early and often during product development, the team needs to know the expected and meaningful reliability prediction of the current design.
Reliability Integration into the Product Development Process
One of the challenges for reliability engineering in product development is reliability integration into the product development process.
Process Capability, Tolerance, and Reliability
How a focus on variability with process control, process capability and tolerances helps to improve reliability.
Fundamentals of Stress-Strength Analysis
How a focus on variability with process control, process capability and tolerances helps to improve reliability.
Fundamentals of Human Factors
If a person is not able to interact with your product, with or without the manual, they may consider your product a failure.
Using Available Weather Data
How to find and analyze temperature readings over a 10 year period, create histogram and determine how many hours below freezing may exist.
Fundamentals of Tolerance Analysis
There are three approaches to set tolerance limits. Each has ramifications for the eventual manufacturability and reliability performance.
Practical Use of Stress-Strength Models to Develop Specifications
Warranty returns are a great start for setting targets for new products. But how do you translate that to specific numbers to design to?
Fundamentals of Design for Reliability
DFR is more than a set of tools or activities, let's explore the building of a reliability culture that support reliability thinking
Fault Tolerance
Fault tolerant design principles are the best approach to reliability. Or not. It depends on your design challenges.
Helping Products Survive Transportation
Besides building your product inside your customer’s facility, your product requires transportation to move your product.
What is Reliability Growth?
This webinar introduces you to the topic of reliability growth (both qualitative and quantitative) along with key concepts
Design for Reliability – Stressors
I will discuss the identification of conditions that cause materials to degrade. Understanding stressors is good for design for reliability
Please login with your site registration to view the video recording and download the ebook.
If you haven’t registered, it’s free and takes only a moment.
This quick introduction to three statistical analysis methods lets you determine or assess part tolerances quickly.
You will also learn why tolerances are critical to achieving a reliable product or system.
The ebook includes guidelines for data analysis, starting with histograms and building probability density functions for use in two of the three methods.
Leave a Reply