Module 8 Non-Replicable Measurement Systems
Lesson M8-05
Text: Section 6, page 11 – 22
Duration: 24 minutes
- Measurement System Assessment
- References and Downloads
- M02 MSA Definitions
- M03 Gage R&R Studies
- 1 Overview and Planning for a Gage R&R Study
- 2 Analysis – Average and Range Method
- 3 Setting up and Analyzing a Gage R&R in Minitab
- 4 Exercise – Analyzing a Gage R&R Study
- 5 Analysis – ANOVA Method
- 6 Analyzing a Gage R&R in Minitab (ANOVA Method)
- 7 Exercises – Analyzing Gage R&R Studies (ANOVA)
- 8 Analysis – ANOVA with Significant Interactions
- 9 Gage R&R with Other Factors (Expanded Gage R&R)
- M04 SPC for Measurement Systems
- M05 Linearity & Bias Assessment
- M06 Attribute Systems Assessment
- M07 Comparing Measurement Systems
- M08 Non-Replicable Measurement Systems
Dynamic Process Conditions
In Lesson 5, we explore the scenario where changing process conditions make the measurement process non-replicable. One option is to use redundant measurement systems and use Grubbs procedure to estimate measurement error. An example and exercise are included. Another (better) option is fit a model to the data coming from the redundant measurement systems. Finally, modeling in general is described to help estimate measurement error.
Downloads
- Measurement System Assessment
- References and Downloads
- M02 MSA Definitions
- M03 Gage R&R Studies
- 1 Overview and Planning for a Gage R&R Study
- 2 Analysis – Average and Range Method
- 3 Setting up and Analyzing a Gage R&R in Minitab
- 4 Exercise – Analyzing a Gage R&R Study
- 5 Analysis – ANOVA Method
- 6 Analyzing a Gage R&R in Minitab (ANOVA Method)
- 7 Exercises – Analyzing Gage R&R Studies (ANOVA)
- 8 Analysis – ANOVA with Significant Interactions
- 9 Gage R&R with Other Factors (Expanded Gage R&R)
- M04 SPC for Measurement Systems
- M05 Linearity & Bias Assessment
- M06 Attribute Systems Assessment
- M07 Comparing Measurement Systems
- M08 Non-Replicable Measurement Systems
Leave a Reply