Module 2 MSA Definitions
Lesson M2-04
Text: Section 1, Pages 13 – 18
Duration: 23 minutes
- Measurement System Assessment
- References and Downloads
- M02 MSA Definitions
- M03 Gage R&R Studies
- 1 Overview and Planning for a Gage R&R Study
- 2 Analysis – Average and Range Method
- 3 Setting up and Analyzing a Gage R&R in Minitab
- 4 Exercise – Analyzing a Gage R&R Study
- 5 Analysis – ANOVA Method
- 6 Analyzing a Gage R&R in Minitab (ANOVA Method)
- 7 Exercises – Analyzing Gage R&R Studies (ANOVA)
- 8 Analysis – ANOVA with Significant Interactions
- 9 Gage R&R with Other Factors (Expanded Gage R&R)
- M04 SPC for Measurement Systems
- M05 Linearity & Bias Assessment
- M06 Attribute Systems Assessment
- M07 Comparing Measurement Systems
- M08 Non-Replicable Measurement Systems
Repeatability & Reproducibility
In the next lesson, we break down precision into the components of repeatability and reproducibility. These are defined conceptually and mathematically through the use of statistics such as the standard deviation and the coverage range of the normal distribution that is used to model measurement error. We summarize all the components of the total variation and finally discuss how these components may be added together using variances.
- Measurement System Assessment
- References and Downloads
- M02 MSA Definitions
- M03 Gage R&R Studies
- 1 Overview and Planning for a Gage R&R Study
- 2 Analysis – Average and Range Method
- 3 Setting up and Analyzing a Gage R&R in Minitab
- 4 Exercise – Analyzing a Gage R&R Study
- 5 Analysis – ANOVA Method
- 6 Analyzing a Gage R&R in Minitab (ANOVA Method)
- 7 Exercises – Analyzing Gage R&R Studies (ANOVA)
- 8 Analysis – ANOVA with Significant Interactions
- 9 Gage R&R with Other Factors (Expanded Gage R&R)
- M04 SPC for Measurement Systems
- M05 Linearity & Bias Assessment
- M06 Attribute Systems Assessment
- M07 Comparing Measurement Systems
- M08 Non-Replicable Measurement Systems
Leave a Reply