Your Reliability Engineering Professional Development Site
A listing in reverse chronological order of these article series:
An important part of the Reliability Centered Maintenance process, or used as a standalone approach for less critical assets; the Failure Mode Effect Criticality Analysis is vital reliability tool. However, a large percentage of organizations do not take advantage of the tool during the design phase of the asset, or to develop the maintenance strategy once the asset is installed.
[Read more…]
Many maintenance organizations invest in a CMMS/EAM in hopes that it will solve their maintenance management problems, only to discover that the software fails to deliver the desired results. Faulty software might be to blame for some CMMS implementation failures, but more often than not, the problems begin well before the software is even implemented. Here are 7 tips for avoiding CMMS failure:
[Read more…]
Entropy and maintenance are more related than you might think. What happens in maintenance and many operations can be explained with this simple thermodynamic concept. Entropy is a concept that represents chaos and degradation. It occurs naturally in any physical system and will naturally grow (i.e.: the system will become more chaotic) if we don’t do something to arrest its growth. Doing something requires the expenditure of energy, so energy is what counters entropy. Entropy and maintenance are seldom discussed together, we don’t speak of these thermodynamic terms and concepts in everyday language and conversation, but they are at work behind the scenes. For practical purposes, if we want something to remain orderly we need to put some form of energy (effort) into keeping it that way. If we don’t, then nature will steadily and relentlessly increase the state of chaos in which we exist. In maintenance that means moving from proactive (which requires energy) to reactive (which drains it away).
In our last series highlighting the 4 primary Failure Modes (FM) of component failures (erosion, corrosion, fatigue and overload), we discussed how to read fractured surfaces. In this follow up series, we will take a look at tips on how to collect, preserve and examine such failed components.
Determining which parts of stock can be a very overwhelming process. As such, many choose to blindly accept the OEM or Manufacturer’s recommendations. And why shouldn’t they? The OEM has many years of experience in building these types of assets and supplying spares, right?
[Read more…]
Business processes are often talked about, yet not well understood. The big problem with them is that too few people know what the whole process actually should be. Whenever you are following a set of steps to achieve some goal you are following a process. Sometimes various people follow different steps to achieve the same goal. You rely on processes in order to deliver results. If they are ill-conceived or inefficient, then things move slowly and results are more expensive to obtain than they need to be. Well designed, efficient, and consistent processes that integrate with other related business processes keep things running smoothly, costs down, and help to keep people motivated.
Mature organizations seeking a competitive edge are familiar with the term Reliability Centered Maintenance (RCM). A maintenance philosophy encompassing predictive, preventative, and maintenance, RCM uses defined processes to find latent or hidden failure modes, customizing maintenance processes to maximize system performance. Most understand that the RCM philosophy enhances equipment availability through improved reliability, increasing annual earnings before interest, tax, and amortization (EBITDA). Yet, some businesses fail to understand that equipment availability comprises two crucial inputs, not one. Equipment reliability, yes, but also equipment maintainability. [Read more…]
Author’s Note: I want to reiterate that this Series about reading the basic fracture surfaces, is for novices who often first come into contact with such failed components. This Series is about the basics (101), and is intended to give readers an appreciation for the value of such ‘broken’ parts to an effective investigation/RCA. While this information will be rudimentary to seasoned materials engineers, I know they will all appreciate heightening awareness to the need to retain such failed parts for analysis, versus throwing them away and just replacing the part. Throwing away failed parts is a recipe for a repeat failure, when one does not understand why the part failed in the first place.
Installing an asset is a critical step that can impact reliability short term and long term. Often times assets are installed without much thought. They are thrown on the machine base, anchors drilled and away the operation goes.
But while focusing on the Installation – Potential Failure – Failure curve, it becomes obvious that time and precision during the installation point can greatly extend the life of the asset. By investing in the installation, the asset will experience less premature failures and extend any wear out mechanisms that are present in the asset.
[Read more…]
Maintenance and Reliability improvement are keys to Operational Excellence – without them, you’ll suffer high costs and reduced outputs. This interview by Ryan Chan of UpKeep gives insight into what Uptime is, how it works towards Maintenance and Reliability improvement. The value it can deliver is high, how it does it is straight-forward, and leaders are needed to make it happen.
Author’s Note: I want to reiterate that this Series about reading the basic fracture surfaces, is for novices who often come into contact with such failed components. This Series is about the basics (101), and is intended to give readers an appreciation for the value of such ‘broken’ parts to an effective investigation/RCA. While this information will be rudimentary to seasoned materials engineers, I know they will all appreciate heightening awareness to the need to retain such failed parts for analysis, versus throwing them away and just replacing the part. Throwing away failed parts is a recipe for a repeat failure, when one does not understand why the part failed in the first place.
More than once or twice, I have heard, if we just got the maintenance department sorted out, our OEE would increase. I have heard this coming from not only operations and management, but also maintenance staff. While it is true that how effective and efficient the maintenance department is will have a direct impact on the operation’s performance, it is not maintenance alone that will enable success.
[Read more…]
Emerging stronger from crisis – that’s our current challenge. We know we can do it. What doesn’t kill us makes us stronger. Our businesses can emerge stronger too, but that won’t happen without leadership and choice.
Capital asset-intensive industries that have had a chance to pause have been wise if they used the opportunity to catch up on deferred maintenance and review their proactive maintenance programs for effectiveness. They will emerge stronger. Better maintained equipment will run better, longer, and last longer, producing more and doing so with lower levels of risk.
This article is directed at those ‘first responders’ who arrive immediately at the failure scene. These are the people who have to ensure the area is safe, preserve the scene for investigators and contribute to a plan to expedite a quick, safe return to production norms.
Many do not understand how valuable failed parts are to the metallurgical/forensic investigators. Broken parts are to metallurgists’, like the murder weapon is to a forensic crime investigator.
Lubrication is often overlooked in organizations. Why it is overlooked, I am unsure. Maybe it is because it is considered to be a basic job, given to the apprentice, or it is just too simple to not to do it correctly.
However, with a focus on lubrication, many failure mechanisms can be reduced and the equipment life prolonged. But implementing an effective and world-class lubrication program is not simple. It requires a dedicated focus to implement and sustain. Below is my list of what I look for when evaluating a lubrication program.
[Read more…]