Accendo Reliability

Your Reliability Engineering Professional Development Site

You are here: Home / Archives for Articles / on Maintenance Reliability

on Maintenance Reliability

A listing in reverse chronological order of these article series:


by Leave a Comment

Two Ways to Get High System Reliability

Two Ways to Get High System Reliability

There are only two ways to get high system reliability if you want a highly reliable system. Equipment in an operation can be configured in series or in parallel. In series, one item connects sequentially to the other. In parallel, each item is arranged as a companion, where one duplicates the other.

A series arrangement needs exceptionally reliable individual equipment to get a highly reliable system. A parallel arrangement can form a highly reliable system even if individual equipment has poor reliability.

[Read more…]

by Leave a Comment

How Humans Matter in Reliability

How Humans Matter in Reliability

In this episode, we talk about the more personal (or human) aspect of equipment Reliability. Who is responsible for Reliability? We know the answer is “everyone” – from top management to the experts who operate and maintain our machines. So it’s vital that we understand one another’s perspectives and responsibilities. We discuss how invisible obstacles can personally affect us – Comfort, the Prison of Perfection, Overwhelm, Our Thoughts, The Voices, and Fear. Fear can be the deadliest one of all. In this episode we discuss a simple – yet powerful technique – to manage fear. When we properly manage the obstacles, we free ourselves up to become more productive and effective equipment custodians.

[Read more…]

by Leave a Comment

Pumping Abrasives With Progressive Cavity, Helical Rotor, Eccentric Screw Pumps

Pumping Abrasives With Progressive Cavity, Helical Rotor, Eccentric Screw Pumps

Often used to pump slurries, helical rotor pumps (also known as progressivity cavity pump, eccentric screw pump, mono pump) use a spiral rotor to move a chamber full of product through the pump. When moving slurries it is critical that the rotor wipes the rubber or elastomer stator firmly, else fine particles get between the rotor and stator and rip material out. This article discusses a major operating problem when the wrong size rotor was used in a stator.

[Read more…]

by Leave a Comment

What is Condition Based Maintenance and How Do You Assign Task Intervals?

What is Condition Based Maintenance and How Do You Assign Task Intervals?

In this episode, we explore what Condition Based Maintenance (CBM) is (aka On-Condition Maintenance). We’ll talk about : – What CBM is – The biggest trap you can fall into when implementing CBM – And what governs how often you do a Condition Based Maintenance task. As asset managers, we know that most Failure Modes occur randomly, and that can seem a little intimidating or maybe even a little scary, but it doesn’t have to be because that’s where Condition Based Maintenance can be very helpful. The whole point of Condition Based Maintenance is to detect a Potential Failure Condition and take action before failure occurs. That interval is called the P-F Interval and that is explained in this episode.

[Read more…]

by Leave a Comment

The Royal Navy Develops a Maintenance Management System, 1624-1670

The Royal Navy Develops a Maintenance Management System, 1624-1670

1624 – Monson’s Tracts Describe Basic Asset Management 

In 1585 at the age of 16, William Monson ran away to sea as a privateer. Later, in the English Navy, he served during the defeat of the Spanish Armada. He was a ship captain, squadron commander, admiral, and eventually a member of parliament. Wikipedia quotes the 1911 Encyclopedia Britannica in calling him the “first naval officer in the modern sense of the word.” Monson is most famous as an early historian of the Royal Navy. 

Monson’s Tracts are a collection of essays written between 1624 and his death in 1643. The essays were not printed until 1682 and were finally published in 1704. The Tracts contain detailed accounts of the Royal Navy’s battles, tactics, voyages, and expeditions.

Monson’s Tracts also recorded the management structure of the dockyards, duties of specific positions, and some repair management practices of the late 1620s to 1630s. Monson criticized graft, waste, and bad management that reduced the navy’s capabilities. 

[Read more…]

by Leave a Comment

Doing Equipment Criticality is as Simple as ABC

Doing Equipment Criticality is as Simple as ABC

This activity-based costing (ABC) method calculates the actual cost of a failure incident and uses the total dollar value to the business as the means to rate equipment criticality. The criticality of an item of plant is determined by the cost consequences and losses of equipment failure across the whole company. Using this method puts a real dollar value on a production equipment loss incident. This financially robust and reliable method provides an accurate way to prioritise production equipment and to justify the necessary risk management and maintenance measures to protect against failure. It recognises that a production failure event has cost repercussions throughout an organisation affecting many people and departments, with all of them incurring costs. These costs are lost business profit that could have been earned and banked, but for the incident. The financial model reflects the actual production and maintenance practices in the operation and their cost implications to the whole organisation if they are inadequate. It delivers clear indication of the responsibility’s managers, supervisors, operators, and maintainers have of properly running, maintaining, and caring for plant and equipment to prevent production-losses to the business.

[Read more…]

by Leave a Comment

Lean Improvement Success at a Concrete Reinforcing Bar Manufacturer

Lean Improvement Success at a Concrete Reinforcing Bar Manufacturer

Reinforcing bar is forged steel used in concrete to give the otherwise weak concrete structural tension strength. Reinforcing bar manufacturing is done in a factory using computerised machines to straighten, cut and bend the steel. It is a highly automated process once the bar is loaded onto the manufacturing machinery. These machines are computer controlled and form the bar to the shape and dimensions instructed. The bar specification and dimensions are identified from the engineering drawings by the Scheduler who enters the details into a scheduling software program. The program converts the reo-bar size requirements into computer controlled manufacturing instructions for the machines and a delivery schedule for the production shop.

Our assignment was to identify opportunities to improve the business and streamline the operation from production through to delivery.

[Read more…]

by Leave a Comment

Introducing Industrial and Manufacturing Wellness

Introducing Industrial and Manufacturing Wellness

Plant Wellness Way EAM methodology uses systems engineering and life-cycle risk elimination to re-engineer your company and operational processes to get utmost asset reliability and maximum success and profits from your operating plant and equipment

You get optimal life-cycle asset management, production, and business processes delivering outstanding plant, equipment, and process reliability

[Read more…]

by Leave a Comment

Mistakes To Avoid When Implementing And Using FRACAS

Mistakes To Avoid When Implementing And Using FRACAS

A failure reporting, analysis, and corrective action system (FRACAS) is an important part of a reliability program. It is used to solve reliability and maintenance issues throughout a plant’s lifecycle. It uses a strict closed-end loop and iterative root causes analysis process. Properly executed, it can add considerable value to a business. However, there are some implementation traps to avoid and best practice tips that optimize results; here are six common issues to consider. [Read more…]

by Leave a Comment

Example Accuracy Controlled Enterprise (ACE) 3T Job Procedure

Example Accuracy Controlled Enterprise (ACE) 3T Job Procedure

Example ACE 3T (Target-Tolerance-Test) Procedure with Reliability Standards: Machine performance is totally dependent on human beings. To address the problem of human error causing equipment failure, an Accuracy Controlled Enterprise sets best practice quality standards and uses 3T Target-Tolerance-Test work task quality control that assures high quality workmanship for high reliability results. Their work procedures are standardised so everyone follows the same methods to produce the same results, their training teaches people how to do craftsmanship work that creates outstandingly reliable plant and machinery. They create the reliability they want and as a result achieve operational excellence.

[Read more…]