Your Reliability Engineering Professional Development Site
Find all articles across all article series listed in reverse chronological order.
The analysis of residuals helps to guide the analyst when analyzing data. It provides a way to select the model, analyze the data, develop parameter estimates, and to develop confidence in the results. [Read more…]
Perry defines Design of Experiments with one simple statement.
“A tool to assist in the process of understanding a system.”
Just 2 minutes and 10 second long, lets break down and understand each phrase in this basic definition of design of experiments. [Read more…]
Have we gone through the introduction of autonomous vehicles before? In other words, have we gone through the introduction of a new, potentially hazardous but wonderfully promising technology?
Of course we have. Many times. And we make many of the same mistakes each time.
When the first automobiles were introduced in the 1800s, mild legislative hysteria ensued. A flurry of ‘red flag’ traffic acts were passed in both the United Kingdom and the United States. Many of these acts required self-propelled locomotives to have at least three people operating them, travel no greater than four miles per hour, and have someone (on foot) carry a red flag around 60 yards in front. [Read more…]
When I entered the working world in February of 1981 I was ready to set the world on fire, I had been hired into an apprentice program at Eastman Kodak Company in Rochester, New York and while some would recognize this as an entry level position, I was determined to make a difference in how this company operated its business. [Read more…]
When you hear the term basic care, what comes to mind?
I remember hearing a story of a brand new packaging line that was installed. It operated at high OEE, delivering significant improvements over the old line. Within 6 weeks, the line was running worse than the original one. Finger pointing ensued, the OEM saying it was how it was maintained. With the manufacturer saying it was a poor design.
A few weeks later, a prominent government official was scheduled to visit the site to officially open the new line. The site was shut down and all the equipment was thoroughly cleaned. The line started up and ran just as well as it did when it was first installed. This story highlights the importance of having clean equipment, and the impact it can have on an operation. This is where Basic Care comes in. [Read more…]
The original windmills of Europe are feats of engineering. I was able to get inside of a few in Holland and see all the mechanisms that have been operating for hundreds of years. I was lucky that the wind was strong and the windmills had their sails out the days I was visiting. A few were grinding flax seed and others designed to pump water from a low basin to
a high basin to control basin water levels. Being inside of the windmill was like being an insect inside of a grandfather clock. It was so interesting seeing how they engineered the mechanisms to optimize the balance of the system needs in such a different manner than we do with many of our currently engineered products. [Read more…]
Guest Post by Umberto Tunesi (first posted on CERM ® RISK INSIGHTS – reposted here with permission)
Or, why we are not listened to?
Why don’t we listen to those who – justifiably – cry wolf?
Be others or ourselves, it does not matter.
The output of this regrettable way of thinking often results in a “chronicle of a death foretold”. What do I mean? [Read more…]
What readers will learn in this article.
I just noticed the new 2018 ASQ CRE Body of Knowledge had been posted on the ASQ site. The new BoK will be in effect for CRE exams as of January 2018. Thus, we have six months to adjust to the new body of knowledge.
This is part 1 of a multipart review of the new BoK. Here we’ll look at the parts that those preparing for the exam will not have to master or review. There are 10+ topics dropped completely or in part from the BoK.
In future articles, we’ll review what has been added, what has been changed (a review), and how to best prepare for exams based on the new BoK. Plus, we can look over past BoK’s to understand where reliability engineering practice is today.
In part, the logic is these sets of tools (topics) that are not widely used by working reliability engineers. In some cases, I agree, and in others, I don’t. Let’s look at the eight topics not found in the upcoming CRE BoK. [Read more…]
Memory circuits store 1’s and 0’s for you so that you can retrieve them later. The 1/0’s can represent data or instructions.
Today, no computing device operates without some memory. Memory devices store pictures, music, documents. How many USB (Unified Serial Bus) memory sticks do you have scattered on your desk?
Semiconductor memory comes in many flavors: Dynamic Random Access Memory (DRAM), Static Random Access Memory (SRAM), Read Only Memory (ROM), Erasable Programmable Memory (EPROM), NAND/NOR Memory (a.k.a. Flash), Solid State Drive (SSD). Without power volatile memories like SRAM and DRAM lose their stored values. Non-Volatile memories retain their stored value when power is absence. [Read more…]
Did you hear what they said? Or, were you busy loading for your next verbal barrage?
As my mother would remind me, one should listen twice of often as speaking. Something about the ratio of ears to mouths in the population. I have to agree with her, that one can learn a lot by listening.
Listening may not seem to be a skill that one needs to master. Yet, how often have you walked away from a meeting where one or more participants obviously were not listening? How often are points repeated in an effort to be heard?
Being able to listen, listen well, can be honed and improved. A focus on being a better listener will improve your ability to communicate and influence as a reliability engineer. It has benefits beyond our reliability work, too. [Read more…]
I had a conference call this morning with some potential clients in regard to rolling out a RCM Blitz™ effort. The sad thing about Reliability Centered Maintenance is the reputation the tool has acquired over the last 40 years has one of two faces.
The sad, tragic and more popular face is that if the Resource Consuming Monster. The reputation that RCM is too detailed, that it takes too long, and that by the time you finish your analysis there are no recourses and there is no money left for implementation. According to a survey conducted on ReliabilityWeb.com nearly 70% of all RCM implementations fail, with statistics like this, it is a wonder the tool still exists. [Read more…]
Imagine a world where the Maintenance Planner can quickly and easier find all the material information for each job. Even those that do not yet have a job plan. Dreams or reality? Reality. This reality is found within operations all over the world and you can have it too. How can you achieve a level of efficiency with your Planner and have all materials information readily available? With Bills of Material.
A Bill of Material or BOM as it is commonly referred to, is a list of material needed to support the operations and maintenance of an asset or component. It includes a part description, part number and how many are required on a specific component or assembly. It may also include a reference number that refers to a sub assembly drawing. [Read more…]
Written instructions make it clear.
Written directions given to maintenance tradesmen to reduce the chance of making an error and to reduce time spent looking for information are called job procedures or job instructions. [Read more…]
Guest Post by Paul Kostek (first posted on CERM ® RISK INSIGHTS – reposted here with permission)
You’ve completed your project’s Risk Management Plan and now you can move forward with project execution because all of the project’s risks have been identified what can go wrong? Well plenty. It’s easy to get caught up in weekly (daily) reviews of the identified risks, tracking status (are the boxes going green, yellow, oh no red?). [Read more…]
